Festool Miter Saw Manuals

1. Find the full model number on the identification label of the tool or appliance.
2. Enter the model number in the search box above, including suffixes and punctuation where shown.
3. Use the exact manual for the model, market, revision and power source; similar model names can differ.
4. Read the safety instructions before using, adjusting or servicing the equipment.
5. Use the troubleshooting and maintenance information below as general guidance only.

Festool KAPEX KS 120 Sliding Compound Miter Saws Manuals

Festool KS120EB Manual

Find model-specific operating instructions, safety requirements, assembly information, routine inspections, troubleshooting steps, and appropriate replacement parts for Festool KS120EB. Confirm the model label and product revision before using any instructions.

Festool KS120REB Manual

Find model-specific operating instructions, safety requirements, assembly information, routine inspections, troubleshooting steps, and appropriate replacement parts for Festool KS120REB. Confirm the model label and product revision before using any instructions.

Festool KS120R Manual

Find model-specific operating instructions, safety requirements, assembly information, routine inspections, troubleshooting steps, and appropriate replacement parts for Festool KS120R. Confirm the model label and product revision before using any instructions.

Festool KAPEX KS 60 Sliding Miter Saws Manuals

Festool KS60E Manual

Find model-specific operating instructions, safety requirements, assembly information, routine inspections, troubleshooting steps, and appropriate replacement parts for Festool KS60E. Confirm the model label and product revision before using any instructions.

Festool KS60E-Set Manual

Find model-specific operating instructions, safety requirements, assembly information, routine inspections, troubleshooting steps, and appropriate replacement parts for Festool KS60E-Set. Confirm the model label and product revision before using any instructions.

Festool Cordless KAPEX Miter Saws Manuals

Festool KSC60EB Manual

Find model-specific operating instructions, safety requirements, assembly information, routine inspections, troubleshooting steps, and appropriate replacement parts for Festool KSC60EB. Confirm the model label and product revision before using any instructions.

Festool KSC60EB-Basic Manual

Find model-specific operating instructions, safety requirements, assembly information, routine inspections, troubleshooting steps, and appropriate replacement parts for Festool KSC60EB-Basic. Confirm the model label and product revision before using any instructions.

Festool Earlier and Regional KAPEX Models Manuals

Festool KS88 Manual

Find model-specific operating instructions, safety requirements, assembly information, routine inspections, troubleshooting steps, and appropriate replacement parts for Festool KS88. Confirm the model label and product revision before using any instructions.

Festool KS88E Manual

Find model-specific operating instructions, safety requirements, assembly information, routine inspections, troubleshooting steps, and appropriate replacement parts for Festool KS88E. Confirm the model label and product revision before using any instructions.

Festool KAPEX Accessories and Underframes Manuals

Festool UG-KAPEX Manual

Find model-specific operating instructions, safety requirements, assembly information, routine inspections, troubleshooting steps, and appropriate replacement parts for Festool UG-KAPEX. Confirm the model label and product revision before using any instructions.

More Model Number Searches

Festool KS manual, Festool 120 manual, Festool EB manual, Festool KS manual, Festool 120 manual, Festool REB manual, Festool KS manual, Festool 120 manual, Festool R manual, Festool KS manual, Festool 60 manual, Festool E manual, Festool KS manual, Festool 60 manual, Festool E-Set manual, Festool KSC manual, Festool 60 manual, Festool EB manual, Festool KSC manual, Festool 60 manual, Festool EB-Basic manual, Festool UG-KAPEX manual, Festool KS manual, Festool 88 manual, Festool KS manual, Festool 88 manual, Festool E manual, Festool KS manual, Festool 120 manual

Festool Miter Saw Will Not Turn On

Check cord or compatible battery, outlet, trigger lock-off and power protection. Never bypass the trigger or guard interlocks.

• Disconnect the mains supply or remove the battery and wait for the blade to stop before inspection.
• Verify the compatible blade and correct workpiece support using the specific operator's manual.
• Do not bypass guards, locks or other safety devices.
• Stop using the saw and seek authorized service when mechanical damage is suspected.

Festool Miter Saw Blade Will Not Spin

Disconnect power, inspect visible obstructions and check correct blade installation and mounting hardware. Motor or drivetrain faults require qualified service.

• Disconnect the mains supply or remove the battery and wait for the blade to stop before inspection.
• Verify the compatible blade and correct workpiece support using the specific operator's manual.
• Do not bypass guards, locks or other safety devices.
• Stop using the saw and seek authorized service when mechanical damage is suspected.

Festool Miter Saw Blade Wobbles

Stop use. With power disconnected, inspect blade damage, arbor fit, mounting washers and spindle for defects.

• Disconnect the mains supply or remove the battery and wait for the blade to stop before inspection.
• Verify the compatible blade and correct workpiece support using the specific operator's manual.
• Do not bypass guards, locks or other safety devices.
• Stop using the saw and seek authorized service when mechanical damage is suspected.

Festool Miter Saw Cuts Are Not Square

Check fence alignment, zero-degree miter setting, bevel stop, blade condition and workpiece clamping against the saw table.

• Disconnect the mains supply or remove the battery and wait for the blade to stop before inspection.
• Verify the compatible blade and correct workpiece support using the specific operator's manual.
• Do not bypass guards, locks or other safety devices.
• Stop using the saw and seek authorized service when mechanical damage is suspected.

Festool Miter Saw 45 Degree Cut Is Inaccurate

Verify miter detents, bevel stops, fence adjustment and scale pointers using the specific calibration procedure.

• Disconnect the mains supply or remove the battery and wait for the blade to stop before inspection.
• Verify the compatible blade and correct workpiece support using the specific operator's manual.
• Do not bypass guards, locks or other safety devices.
• Stop using the saw and seek authorized service when mechanical damage is suspected.

Festool Miter Angle Will Not Adjust

Release the correct miter lock or detent lever and remove accessible sawdust. Do not force damaged mechanisms.

• Disconnect the mains supply or remove the battery and wait for the blade to stop before inspection.
• Verify the compatible blade and correct workpiece support using the specific operator's manual.
• Do not bypass guards, locks or other safety devices.
• Stop using the saw and seek authorized service when mechanical damage is suspected.

Festool Bevel Adjustment Not Working

Confirm bevel lock and stop override settings, check fence clearance and follow the model’s bevel adjustment procedure.

• Disconnect the mains supply or remove the battery and wait for the blade to stop before inspection.
• Verify the compatible blade and correct workpiece support using the specific operator's manual.
• Do not bypass guards, locks or other safety devices.
• Stop using the saw and seek authorized service when mechanical damage is suspected.

Festool Blade Guard Not Retracting

Disconnect power, inspect visible obstruction or damage. Never run the saw with a defective or disabled guard.

• Disconnect the mains supply or remove the battery and wait for the blade to stop before inspection.
• Verify the compatible blade and correct workpiece support using the specific operator's manual.
• Do not bypass guards, locks or other safety devices.
• Stop using the saw and seek authorized service when mechanical damage is suspected.

Festool Miter Saw Head Will Not Lower

Check the transport pin or head lock and accessible interference; never force the hinge or guard mechanism.

• Disconnect the mains supply or remove the battery and wait for the blade to stop before inspection.
• Verify the compatible blade and correct workpiece support using the specific operator's manual.
• Do not bypass guards, locks or other safety devices.
• Stop using the saw and seek authorized service when mechanical damage is suspected.

Festool Sliding Rails Sticking

Confirm slide lock position, clear accessible debris and follow model-specific approved cleaning guidance; avoid unapproved lubricant.

• Disconnect the mains supply or remove the battery and wait for the blade to stop before inspection.
• Verify the compatible blade and correct workpiece support using the specific operator's manual.
• Do not bypass guards, locks or other safety devices.
• Stop using the saw and seek authorized service when mechanical damage is suspected.

Festool Laser Guide Not Working

Check whether the model has a laser, power and switch, and carefully clean the lens. Do not stare into a laser beam.

• Disconnect the mains supply or remove the battery and wait for the blade to stop before inspection.
• Verify the compatible blade and correct workpiece support using the specific operator's manual.
• Do not bypass guards, locks or other safety devices.
• Stop using the saw and seek authorized service when mechanical damage is suspected.

Festool LED Cutline Not Working

Check light switch, power supply and lens cleanliness on models with LED cutline features.

• Disconnect the mains supply or remove the battery and wait for the blade to stop before inspection.
• Verify the compatible blade and correct workpiece support using the specific operator's manual.
• Do not bypass guards, locks or other safety devices.
• Stop using the saw and seek authorized service when mechanical damage is suspected.

Festool Dust Collection Not Working

Empty dust bag, inspect accessible dust port blockage and use compatible vacuum fittings with respiratory protection.

• Disconnect the mains supply or remove the battery and wait for the blade to stop before inspection.
• Verify the compatible blade and correct workpiece support using the specific operator's manual.
• Do not bypass guards, locks or other safety devices.
• Stop using the saw and seek authorized service when mechanical damage is suspected.

Festool Miter Saw Making Grinding Noise

Stop and unplug or remove batteries; inspect accessible blade interference or debris. Persistent grinding requires professional diagnosis.

• Disconnect the mains supply or remove the battery and wait for the blade to stop before inspection.
• Verify the compatible blade and correct workpiece support using the specific operator's manual.
• Do not bypass guards, locks or other safety devices.
• Stop using the saw and seek authorized service when mechanical damage is suspected.

Festool Miter Saw Vibrates Excessively

Inspect blade damage and mounting, workbench stability and hardware. Stop use if severe vibration continues.

• Disconnect the mains supply or remove the battery and wait for the blade to stop before inspection.
• Verify the compatible blade and correct workpiece support using the specific operator's manual.
• Do not bypass guards, locks or other safety devices.
• Stop using the saw and seek authorized service when mechanical damage is suspected.

Festool Miter Saw Burns Wood

Check blade sharpness and suitability, alignment, material binding and feed pressure.

• Disconnect the mains supply or remove the battery and wait for the blade to stop before inspection.
• Verify the compatible blade and correct workpiece support using the specific operator's manual.
• Do not bypass guards, locks or other safety devices.
• Stop using the saw and seek authorized service when mechanical damage is suspected.

Festool Miter Saw Produces Rough Cuts

Use the correct undamaged blade tooth configuration, secure material and avoid forcing cuts.

• Disconnect the mains supply or remove the battery and wait for the blade to stop before inspection.
• Verify the compatible blade and correct workpiece support using the specific operator's manual.
• Do not bypass guards, locks or other safety devices.
• Stop using the saw and seek authorized service when mechanical damage is suspected.

Festool Miter Saw Blade Bolt Will Not Loosen

Disconnect power and use the approved shaft lock, wrench and exact model-specific bolt thread direction. Do not force damaged hardware.

• Disconnect the mains supply or remove the battery and wait for the blade to stop before inspection.
• Verify the compatible blade and correct workpiece support using the specific operator's manual.
• Do not bypass guards, locks or other safety devices.
• Stop using the saw and seek authorized service when mechanical damage is suspected.

Festool Miter Saw Blade Is Loose

Do not operate. Disconnect power and follow blade installation instructions for flanges, arbor and bolt.

• Disconnect the mains supply or remove the battery and wait for the blade to stop before inspection.
• Verify the compatible blade and correct workpiece support using the specific operator's manual.
• Do not bypass guards, locks or other safety devices.
• Stop using the saw and seek authorized service when mechanical damage is suspected.

Festool Miter Saw Stops Under Load

Check compatible power or battery, blade condition, tool overload limits and cutting pressure.

• Disconnect the mains supply or remove the battery and wait for the blade to stop before inspection.
• Verify the compatible blade and correct workpiece support using the specific operator's manual.
• Do not bypass guards, locks or other safety devices.
• Stop using the saw and seek authorized service when mechanical damage is suspected.

Festool Miter Saw Blade Replacement Problems

Verify blade diameter, arbor, speed rating, kerf requirements, rotation direction and correct guard reassembly.

• Disconnect the mains supply or remove the battery and wait for the blade to stop before inspection.
• Verify the compatible blade and correct workpiece support using the specific operator's manual.
• Do not bypass guards, locks or other safety devices.
• Stop using the saw and seek authorized service when mechanical damage is suspected.

Festool Miter Saw Crown Molding Cuts

Select manufacturer-approved nested or flat method, confirm capacity and test angles on scrap molding.

• Disconnect the mains supply or remove the battery and wait for the blade to stop before inspection.
• Verify the compatible blade and correct workpiece support using the specific operator's manual.
• Do not bypass guards, locks or other safety devices.
• Stop using the saw and seek authorized service when mechanical damage is suspected.

Festool Miter Saw Baseboard Cuts

Measure actual corners, support long stock and verify the intended miter angle with a test cut.

• Disconnect the mains supply or remove the battery and wait for the blade to stop before inspection.
• Verify the compatible blade and correct workpiece support using the specific operator's manual.
• Do not bypass guards, locks or other safety devices.
• Stop using the saw and seek authorized service when mechanical damage is suspected.

Festool Miter Saw Carbon Brush Issues

Only some motors use serviceable carbon brushes. Brushless motors do not; follow the correct service manual.

• Disconnect the mains supply or remove the battery and wait for the blade to stop before inspection.
• Verify the compatible blade and correct workpiece support using the specific operator's manual.
• Do not bypass guards, locks or other safety devices.
• Stop using the saw and seek authorized service when mechanical damage is suspected.

Festool Miter Saw Transport and Storage

Use specified head and slide locks with power disconnected, guard the blade and store dry.

• Disconnect the mains supply or remove the battery and wait for the blade to stop before inspection.
• Verify the compatible blade and correct workpiece support using the specific operator's manual.
• Do not bypass guards, locks or other safety devices.
• Stop using the saw and seek authorized service when mechanical damage is suspected.

How to Change a Miter Saw Blade

1. Disconnect mains power or remove all batteries.
2. Confirm the exact blade diameter, arbor, rotation direction and speed rating.
3. Follow the model-specific guard access and spindle lock instructions.
4. Remove the blade bolt with the approved wrench and thread direction.
5. Inspect mounting flanges and install a compatible new blade.
6. Reassemble guard components and verify free, correct movement before operation.

How to Calibrate a Miter Saw

1. Disconnect power before adjustments.
2. Clean the table, fence and alignment surfaces.
3. Inspect blade and mounting for damage.
4. Check the fence and zero-degree miter setting with suitable measuring tools.
5. Verify zero-degree bevel and supported angle stops according to the manual.
6. Secure adjustment fasteners and perform a safe test cut on scrap material.

Miter Saw Cleaning and Maintenance Checklist

1. Remove sawdust from accessible surfaces with the power disconnected.
2. Inspect blade, guard and return mechanism for damage.
3. Check fence and workpiece clamp security.
4. Keep sliding rails or glide arms clean using approved methods.
5. Check transport locks and dust extraction components.
6. Store tools dry and inspect batteries and power cords before reuse.

Why is my miter saw not turning on?

Check cord or compatible battery, outlet, trigger lock-off and power protection. Never bypass the trigger or guard interlocks. Confirm the exact model in the instruction manual; specifications and procedures vary.

How do I change the saw blade?

Disconnect power, inspect visible obstructions and check correct blade installation and mounting hardware. Motor or drivetrain faults require qualified service. Confirm the exact model in the instruction manual; specifications and procedures vary.

How do I adjust the miter angle?

Stop use. With power disconnected, inspect blade damage, arbor fit, mounting washers and spindle for defects. Confirm the exact model in the instruction manual; specifications and procedures vary.

Why are my 90-degree cuts inaccurate?

Check fence alignment, zero-degree miter setting, bevel stop, blade condition and workpiece clamping against the saw table. Confirm the exact model in the instruction manual; specifications and procedures vary.

How do I calibrate bevel stops?

Verify miter detents, bevel stops, fence adjustment and scale pointers using the specific calibration procedure. Confirm the exact model in the instruction manual; specifications and procedures vary.

Why does the blade wobble?

Release the correct miter lock or detent lever and remove accessible sawdust. Do not force damaged mechanisms. Confirm the exact model in the instruction manual; specifications and procedures vary.

Why will the blade guard not close?

Confirm bevel lock and stop override settings, check fence clearance and follow the model’s bevel adjustment procedure. Confirm the exact model in the instruction manual; specifications and procedures vary.

How do I unlock the saw head?

Disconnect power, inspect visible obstruction or damage. Never run the saw with a defective or disabled guard. Confirm the exact model in the instruction manual; specifications and procedures vary.

Why are sliding rails sticking?

Check the transport pin or head lock and accessible interference; never force the hinge or guard mechanism. Confirm the exact model in the instruction manual; specifications and procedures vary.

What blade size and arbor do I need?

Confirm slide lock position, clear accessible debris and follow model-specific approved cleaning guidance; avoid unapproved lubricant. Confirm the exact model in the instruction manual; specifications and procedures vary.

Can I cut metal with this saw?

Check whether the model has a laser, power and switch, and carefully clean the lens. Do not stare into a laser beam. Confirm the exact model in the instruction manual; specifications and procedures vary.

How do I find replacement parts?

Check light switch, power supply and lens cleanliness on models with LED cutline features. Confirm the exact model in the instruction manual; specifications and procedures vary.

• Festool KS miter saw manual, operating instructions and parts information
• Festool 120 miter saw manual, operating instructions and parts information
• Festool EB miter saw manual, operating instructions and parts information
• Festool KS miter saw manual, operating instructions and parts information
• Festool 120 miter saw manual, operating instructions and parts information
• Festool REB miter saw manual, operating instructions and parts information
• Festool KS miter saw manual, operating instructions and parts information
• Festool 120 miter saw manual, operating instructions and parts information
• Festool R miter saw manual, operating instructions and parts information
• Festool KS miter saw manual, operating instructions and parts information
• Festool 60 miter saw manual, operating instructions and parts information
• Festool E miter saw manual, operating instructions and parts information
• Festool KS miter saw manual, operating instructions and parts information
• Festool 60 miter saw manual, operating instructions and parts information
• Festool E-Set miter saw manual, operating instructions and parts information
• Festool KSC miter saw manual, operating instructions and parts information
• Festool 60 miter saw manual, operating instructions and parts information
• Festool EB miter saw manual, operating instructions and parts information
• Festool KSC miter saw manual, operating instructions and parts information
• Festool 60 miter saw manual, operating instructions and parts information
• Festool EB-Basic miter saw manual, operating instructions and parts information
• Festool UG-KAPEX miter saw manual, operating instructions and parts information
• Festool KS miter saw manual, operating instructions and parts information
• Festool 88 miter saw manual, operating instructions and parts information
• Festool KS miter saw manual, operating instructions and parts information
• Festool 88 miter saw manual, operating instructions and parts information
• Festool E miter saw manual, operating instructions and parts information
• Festool KS miter saw manual, operating instructions and parts information
• Festool 120 miter saw manual, operating instructions and parts information